Explore your Set-top Box



Front Panel
  1. Power: Switches the Set-top Box (STB) in "standby mode" or in "power on mode".
  2. Menu: Launches or terminates the menu application.
  3. Standby / Power on indication light: Turns red while in "standby mode" and turns off while in the "power on mode"
  4. Message indication light: Turns orange when STB receives a message.
  5. Remote Sensor: Receives the infrared signal from Remote Control Unit.
  6. Arrow Keys: Navigates interface Left/Right and changes cursor position.
  7. OK: Activates a highlighted item or goes to next level on hypertext menu or to confirm the user's action.
  8. Infra Red Activity Indication Light: Turns green while in the "power on mode" Flashes green when receiving data from Remote Control Unit.
  9. Arrow Keys: Navigates interface Up/Down & changes cursor position.
  10. Smart Card Slot: Open flap and insert a Smart Card fully into the slot.
Rear Panel
  1. Antenna In: Input from Terrestrial Antenna. Connect to Cable Network of Active Antenna.
  2. Loop out & RF out:Terrestrial signal loop out & RF re-modulation out to TV set. Connect to RF Terminal of TV set.
  3. Component: Component Video (Y/Pb/Pr) Output Connect to component Video terminal of TV set
  4. LNB Input: Digital satellite signal input from Dish Antenna (LNB) to Tuner.
  5. Video: Composite video output to TV. Connect to composite video terminal of TV set.
  6. Audio L & R: Left & Right Audio output. Connect to Audio terminal of TV set or Hi-Fi Audio system.
  7. USB: Port for USB device.
  8. Loop out: Loop through output from digital Tuner.
  9. DC Jack: DC 12V input from Adopter. Connect Adopter plug.
Reliance Digital TV HD DVR Set-top Box

Front Panel
  1. Power: To switch the Set-Top Box into “standby mode” or in “power on mode”
  2. Navigation Panel : Use arrow keys Left/Right/Up/Down to navigate
  3. Menu: To display the Home/Main menu
  4. OK : To activate highlighted item or to confirm an action
  5. Remote Sensor: Receives the infrared (IR) signal from Remote Control Unit
  6. Standby LED: Turns red while in “stand by mode”
  7. Remote LED: Flashes green when receiving data from Remote Control Unit
  8. Record LED: Turns amber while in “recording mode”
  9. Smart Card Slot: Insert a smart card to watch pay TV channels/content
  10. Common Interface (CI) Slot: To insert CAM module (PCMCIA module)
Rear Panel
  1. LNB Input 2: Digital Satellite signal input from Dish Antenna (LNB) to Tuner
  2. LNB Input 1: Digital Satellite signal input from Dish Antenna (LNB) to Tuner
  3. USB: Port for USB device
  4. RF Out: RF Video & Audio output to TV Connect to RF Terminal of TV set
  5. LAN: Port of Ethernet service
  6. HDMI: HDMI Video & Audio output to TV Connect to HDMI Terminal of TV set
  7. S/PDIF: S/PDIF Audio output Connect S/PDIF output of the Set-Top Box to your TV set/Hi-Fi Audio System S/PDIF input
  8. Audio L & R: Left & Right Audio output Connect to Audio Terminal of TV set/Hi-Fi Audio System
  9. Video: Composite Video output to TV Connect to Composite Video Terminal of TV set
  10. Component: Component Video (Y/Pb/Pr) output Connect to Component Video Terminal of TV set
  11. DC Jack: DC 12V input from Adapter Connect to power socket
Reliance Digital TV HD Set-Top Box

Front Panel
  1. Power: To switch the STB to "standby mode" or to "power on mode"
  2. Standby LED: Turns red while in "standby mode", and turns green while in the "power on mode". Flashes green when receiving data from Remote Control Unit
  3. Volume (-/+): To adjust the volume
  4. Channel (): To change channel
  5. Remote Sensor: Receives the infrared (IR) signal from Remote Control Unit
Rear Panel
  1. LNB Input: Digital Satellite signal input from Dish Antenna (LNB) to Tuner
  2. USB: 2 Ports for USB device
  3. LAN: Port of Ethernet service
  4. Component: Component Video (Y/Pb/Pr) output Connect to Component Video Terminal of TV set
  5. S/PDIF: S/PDIF Audio output Connect S/PDIF output of the STB to your TV set /Hi-Fi Audio System S/PDIF input
  6. Video: Composite Video output to TV Connect to Composite Video Terminal of TV set
  7. Audio L & R: Left & Right Audio output Connect to Audio Terminal of TV set or Hi-Fi Audio system
  8. HDMI: HDMI Video & Audio output to TV Connect to HDMI Terminal of TV set
  9. DC Jack: DC 12V input from Adapter Connect to power socket
Customer premise equipment includes:
  • Set-top Box
  • Dish Antenna
  • Remote with 2 AA Batteries
  • Smart Card
  • AV Cables (for connecting TV and STB)
  • RG6 Cables (signal cable and recording cable from Dish to STB)
  • LNB
  • Power Adaptor
  • Setup Guide
FAQs
  • What other devices can be plugged into/used with the set-top box?
    Currently other than your television no other device can be plugged into/used with the set-top box.
  • Is there any pre-loaded memory in the set-top box?
    The standard set-top-box has no memory available. The HD DVR set-top-box has a 160 GB hard drive which can store up to 200 hours of content.
Downloads
Standard STB User Guide (1.5 mb)
HD STB User Guide (1.5 mb)
HD DVR STB User Guide (9 mb)
Setup Companion (1.1 mb)
Sale and Hire-Purchase Schemes (0.25 mb)